Creating your own pcDuino AstroBox

NOTE: Support for the pcDuino platform was discontinued in 2017. You can flash the latest available image using these instructions. However we no longer provide technical support or software upgrades for this platform. You should consider moving on to our Raspberry Pi based software.

 

There are two steps to turn your pcDuino into an AstroBox:

 

1) Flashing the AstroBox system software into your pcDuino.

 

Follow instructions on this page.

 

2) Setting up your AstroBox.

 

At this point, you should remove your flashing SD Cards from the SD card slot and optionally insert a blank SD Card for additional file storage.

 

Next, setup your AstroBox following the general First Time Setup Instructions.